Best Torque Wrenches: Crank That

Top 8 Best Torque Wrenches

If you’re doing any sort of DIY work that requires the removal and installation of nuts and bolts, a torque wrench is a great tool to have on hand. This is doubly true if you have a propensity for swapping the wheels and tires of your vehicle. Properly torquing those lug nuts is critical to avoid a potentially calamitous situation.

Torque wrenches, in case you’re new to this racket, act like a regular ratchet wrench but ceases the socket’s tightening action when resistance reaches a certain level. This level would have been set by the user before beginning to use the tool. At this point, a loud CLICK is heard, advertising that the indicated torque setting has been reached, as measured in lb-ft.

Common torque for a set of lug nuts, for example, could be anywhere between 80 and 140 lb-ft of twist, so it’s important to check a service manual before over- or under-tightening those fasteners. And, no, simply tightening them as much as you can or snugging them down to a ‘medium grunt’ isn’t approved by any known manufacturer.

This one is far from cheap but, as an astute salesperson might say, can you really put a price on safety? Hackneyed closing attempts aside, this wrench has stellar ratings and appears to be made to exacting standards. The torque settings are dialed in via a digital readout, ensuring accuracy in your job. Note that this is a 1/2-inch drive.

The tool does not have to be ‘turned down’ after use, providing convenience compared to cheaper units. The length, over two feet, provides the needed reach for those hard-to-get-at places. It weighs 4.5 lbs, making it easy enough to carry around if not exactly of featherweight. Feedback provided on the site suggests the thing maintains calibration even in tough environments.

The VANPO Digital Torque Screwdriver is a high-precision tool designed for electronics, bicycle maintenance, and specialized machinery. It features a digital interface with ±2% accuracy across four measurement modes, namely, Nm, kg-cm, in-lb, and ft-lb.

Up to six programmable preset torque values and the ability to store a history of 500 data points in Peak mode make tracking easy. The tool is equipped with a quick-release ratchet head, comes with 20 S2 bits, and provides LED and buzzer notifications to prevent over-tightening. Built with a hardened chrome vanadium steel head, it aims to provide professional-grade reliability for precision mounting tasks.

Pros: Precise digital feedback.

Cons: Glitchy unit scaling.

Bottom Line: Accurate, useful presets.

Also enjoying top-notch ratings from a decent sample size of customers is this natty black-and-yellow torque wrench from a company called Lexivon. The yellow print is a bigger deal than you whippersnappers might think, as us old guys sometimes have a hard time reading the silver-on-silver inscriptions that appear on other torque wrenches.

Shipped pre-calibrated and ready to use, this wrench is good for a wide range of torque specifications, all the way from 10 to 150 units of grunt. It’s of lighter weight than the wrench at the top of this post, weighing a good pound less. While that might not sound like a lot, it’s about a quarter of its weight; stand with one in your outstretched arms for five minutes and you’ll soon see the difference.

Here’s an affordable wrench that has a big range of torquing capability and also comes with a couple of accessories. As with most, a storage case is included but is of the unlovely blow-molded plastic-type. A simple and reliable ‘click’ lets the user know when the preset torque value is reached.

There are different styles of this wrench available, ranging from one built for motorcycles to a unit stretching itself all the way to 250 lb-ft of torque. Reviews range from tremendous to abysmal, though there are far more of the former than latter.

Sometimes, a small amount of force is all that’s needed to get the job done. Look at most political campaigns for proof. This diminutive wrench measures its torque delivery in inch-pounds, making it better for jobs where small force but big precision is required.

According to the seller, this unit’s calibration is better in terms of +/- percentage than most other competitors. The head’s paddle permits the ratchet to move in either direction. The size and limits of this tool make it a good choice for bikes and certain underhood tasks.

Designed for automotive, motorcycle, and bicycle maintenance, the SUERCUP 3/8-Inch Drive Click Torque Wrench is a precision-focused tool that covers a range of 5-45 Ft-Lb (6.8-61 Nm) and features a high-contrast, dual-range scale for enhanced readability.

Constructed from hardened Chrome Vanadium steel with a 72-tooth Chromium Molybdenum ratchet head, it allows for torque measurement in both clockwise and counterclockwise directions. The tool is equipped with a pull-down locking knob for quick settings and a knurled, non-slip handle for better leverage.

Each unit comes with a dedicated plastic storage case, making it a portable option for spark plug changes and general mechanical repairs.

Pros: High-contrast dual scale.

Cons: Faint click mechanism.

Bottom Line: Sturdy storage case.

The cradle of Bezos seems to have their name stamped on any number of products these days, and torque wrenches are no exception. However, unlike a rooftop cargo carrier profiled some weeks ago, the Amazon logo is not on display 24/7 for all to see.

Quarter- and three-eighths-inch drives are available in addition to this half-inch wrench, which can be set to anything between 25 and 250 lb-ft of torque. It’s pre-calibrated and shipped in a plastic case like most other things on this list. ‘Tis a heavy beast at nearly six pounds, which either denotes quality construction or an assembly made out of unobtanium.

Last on our list is this wrench bearing a brand name that will either evoke comfort or send you running in fear, depending on your experiences working on and around General Motors products. This is a big wrench, spanning a best-in-list 26.25 inches, permitting more exertion than smaller wrenches (make all your inappropriate jokes in the comments, ok?).

It’s expensive, reversible, and calibrated to within 1.5 percent when being used in a clockwise direction. That latter stat is far beyond the seemingly industry standard deviation of 4 percent. Thanks to the LCD readout on the handle, a pair of AA batteries are required but not included.

Best Torque Wrenches: Crank That

What brand of torque wrench is best?

Even though many brands are there and they all manufacture competitive torque wrenches, some that most people rely on are listed below:

Tekton

The company is quite mature and manufactures quality and pocket-friend products.

Gorilla Automotive

The company has around 40 years of experience in manufacturing tools, including torque wrenches.

CDI

This brand is in the market for around 54 years and focuses primarily on torque-oriented products.

What type of torque wrench is most accurate?

Usually, the Dial-Type torque wrenches are considered to be the most accurate because of the way they function, which is explained below:

Some more sophisticated dial-type wrenches even have a small bulb and/or beeper attached to them to indicate when the torque has reached its maximum level.

Additional Info

Although electronic torque wrenches are also available these days that allow you to set and then show the torque level on a digital display, they are pretty expensive and need to connect to a computer to download updates at regular intervals.

Nevertheless, electronic torque wrenches are quite accurate as well.

Who makes good torque wrenches?

The companies that manufacture some reliable torque wrenches are:

Halfords

Tri-Torq

Sealey

How do I choose the right torque wrench?

The kind of torque wrench that you need majorly depends on the vehicle you’re buying it for. The types of torque wrenches that are available in the market are:

Dial-Type – This torque wrench, as explained earlier, has an analog dial with two needles that allow you to set the maximum required torque and indicate when you reach that threshold and need to stop torquing further

Beam-Style – A beam-style torque wrench comprises two arms where the first arm stays immobile and is used as a handle, and the second arm moves and indicates the amount of applied torque as you tighten the bolt

Click-Style – A click-style torque wrench has a rotatable knob on its handle and is used to set the amount of torque that needs to be applied on a fastener. As you hit the specified threshold, the wrench produces a click sound to tell you to stop going further

Electronic – An electronic torque wrench can be thought of as a combination of a dial-type and click-style wrench where you set the maximum required torque on a digital display screen. As you reach the specified limit, the wrench produces a beep sound to alert you to stop torquing further

In addition to different wrench types, you must also know the amount of torque that they can handle. The varied sizes in which these wrenches are available include:

Small – Range: 4-22Nm (30-200in.-lbs.) with ¼” to 3/8” square drives

Medium – Range: 17-34Nm (20-30ft.-lbs.) with a ½” square drive

Large – Range: 305-1320Nm (200-1000ft.-lbs.) with a 1” square drive

Now, as mentioned earlier, you can choose your preferred type and size/capacity of a torque wrench (or even a set of wrenches) depending on the vehicle(s) you are planning to use the tool(kit) with.

From time to time, TTAC will highlight automotive products we think may be of interest to our community. Plus, posts like this help to keep the lights on around here. Learn more about how this works.

(Editor’s note: This post is meant to both help you be an informed shopper for automotive products but also to pay for our ‘90s sedan shopping habits operating expenses. Some of you don’t find these posts fun, but they help pay for Junkyard Finds, Rare Rides, Piston Slaps, and whatever else. Thanks for reading.)

[Main photo credit: Vladimir Zhupanenko / ShutterStock.com. Product images provided by the manufacturer.]